BGA Rework Station System
The DH-5830 was upgraded with a new function -- an airflow button which is used for a small chip desoldering or soldering, it is especially popular in India, South America and East-south Asia; It's not too heavy, packed weight is about 60kg, a cheap shipping cost and simple installation and very useful make it widely used in the world. The course is suitable for all cell phone operators, computer technicians, electronic technicians who operate on cards of a modern conception
Description
BGA rework station system
The model DH-5830 features with MCGS touchscreen and 3 independents heating zones, 2 hot air heaters of
them works for a component desoldering or soldering on a motherboard, such as, iphone, Macbook, Lenovo
computer and Huawei electronics and so on.
The freely rotating top head is very convenient for a chip at a different position on a motherboard to removed or
replaced.
Workbench with a size up to 400*420mm meets most all of PCB in nowadays world, such as TV, computer and
other appliance etc.
Touchscreen with 7 inches, MCGS brand, HD and sensitive, temperature and time set on it, the real-time temperature
can be checked by clicking touchscreen.
The parameter of BGA rework station system
| Power supply | 110~250V 50/60Hz |
| Rated power | 5500W |
| Upper heater | 1200W |
| Lower heater | 1200W |
| Bottom IR | 3000W |
| PCB size | 10*10~400*420mm |
| Chip size | 2*2~80*80mm |
|
Power plug |
USA, EU or CN, option and customize |
| 2 hot air heaters |
For soldering and desoldering |
| IR preheating zone | For a PCB to be preheated before soldering |
| PCB available size | Max 400*390mm |
| A component size | 2*2~75*75mm |
| Net weight | 31kg |
The machine with 4 sides to be viewed as below
Vacuum pen, built-in, 1m long, 3 vacuum caps, which is used for a component picked up or replaced back
from/on a motherboard.
Air switch( for power on/off), in case of being short or leakage, it will be automatic cut off, which makes
a technician protected.
Earth wire connector available, we suggest users would better connect it well before using it.
Two cooling fans for the whole machine cooled, which were imported from Delta in Taiwan, powerful
wind and quiet running.
A wire in black and solid spool which supplies power for hot air heater of the top head makes top head can
be rotated for a component at a different position on a PCB.
FAQ of BGA rework system
Q: how to use BGA reballing kit?
A: when you received, there is CD teaching you. Also, we can guide you online.
Q: what are reballing kits?
A: such as, solder wick, Kapton tape, soldering ball, BGA flux, and stencils, etc.
Q: can I print my logo on the machine?
A: Yes, you can.
Q:Are you a manufacturer of BGA rework machine?
A: Absolutely yes.
Working video of BGA rework station system:
