Laser Position Optical Automatic BGA Rework Station

Laser Position Optical Automatic BGA Rework Station

Dinghua DH-A2 Semi-Automatic BGA Rework Station. Optical Camera. Hot air and infrared heating. 100% safety system.

Description

                                   

Semi Automatic Optical Alignment BGA Reballing Machine

Semi Automatic Optical Alignment BGA Reballing Machine

1. Product Features 

Semi Automatic Optical Alignment BGA Reballing Machine

• Semi-automation. The top head can rise and decline automatically. Built-in Vacuum suction can place and pick 

up chips automatically

•High success rate of repairing due to precise temperature control and precise alignment of every soldering joint.

•The upper and lower hot air heating, which can heat up at the same time from the top of the component to the bottom 

•Temperature is controlled strictly. PCB won't crack or turn yellow because temperature rises gradually.

• Curves can be displayed with the instant curve analysis function

2.Specification

Power 5300w
Top heater Hot air 1200w
Bottom heater Hot air 1200W. Infrared 2700w
Power supply AC220V±10% 50/60Hz
Dimension L530*W670*H790 mm
Positioning V-groove PCB support, and with external universal fixture
Temperature control Ktype thermocouple,closed loop control,independent heating
Temperature accuracy ±2℃
PCB size Max 450*490 mm, Min 22 *22 mm
Workbench fine-tuning ±15mm forward/backward,±15mm right/left
BGA chip 80*80-1*1mm
Minimum chip spacing 0.15mm
Temp Sensor 1(optional)
Net weight 70kg

3.Details 

Semi Automatic Optical Alignment BGA Reballing Machinechip desoldering machinepcb desoldering machine

4.Why Choose Our Laser position Optical Automatic BGA Rework Station?

Semi Automatic Optical Alignment BGA Reballing Machinemobile phone desoldering machine

5.Certificate 

UL, E-MARK, CCC, FCC, CE ROHS certificates. Meanwhile, to improve and perfect the quality system, Dinghua 

has passed ISO, GMP, FCCA, C-TPAT on-site audit certification.

Semi Automatic Optical Alignment BGA Reballing Machine

6.Packing

Semi Automatic Optical Alignment BGA Reballing Machine

7. Shipment

Fast and safe DHL/TNT/UPS/FEDEX

Other shipment terms are acceptable if you need.

Semi Automatic Optical Alignment BGA Reballing Machine

8. Payment terms

Bank transfer, Western Union, Credit card. 

Shipment will be arranged with 5-10 business after placing orders.

9.Contact us

Welcome to visit our factory for business cooperation.
Please add leave a message, we will contact you as soon as possible

10. Related Knowledge About Motherboard Repair

Reasons for Motherboard Failure

1.Human Errors: These include plugging in I/O cards with the power on, or damaging interfaces, chips, etc., due to improper handling when inserting boards and plugs.

2.Poor Environment: Static electricity often causes damage to the motherboard chip (especially the CMOS chip). Additionally, when the motherboard is exposed to power supply damage or voltage spikes from the grid, it can damage the chip near the power supply connector on the system board. Dust accumulation on the motherboard can also lead to signal short circuits.

3.Device Quality Issues: Damage caused by poor-quality chips or other components. It is important to note that dust is one of the biggest enemies of the motherboard.

Instructions

Operating Instructions

1.Dust Prevention: Pay attention to dust and use a brush to gently remove it from the motherboard. Additionally, some cards and chips on the motherboard have pin connectors that can become oxidized, leading to poor contact. Use an eraser to remove the surface oxide layer, then reinsert the component.

2.Cleaning with Chemicals: You can also use trichloroethane (evaporation) for cleaning the motherboard.

3.Handling Sudden Power Failure: In the event of a sudden power failure, immediately turn off the computer to avoid damaging the motherboard and power supply.

4.BIOS Settings and Overclocking: If improper BIOS settings or overclocking causes instability, reset the BIOS settings. If the BIOS is corrupted (e.g., due to a virus), you can rewrite the BIOS. Since the BIOS is software-based and cannot be measured with instruments, it is best to "flash" the BIOS to eliminate potential issues.

5.Common Causes of System Failures: Many system failures stem from issues with the motherboard or I/O card failures. The "plug-and-play" maintenance method is a simple way to determine if the fault lies with the motherboard or an I/O device. This method involves shutting down the system and removing each card one by one. After each card is removed, restart the machine and observe its behavior. If the system operates normally after removing a specific card, the fault likely lies with that card or its corresponding I/O slot. If the system still does not start properly after all the cards are removed, the issue is likely with the motherboard.

6.Component Swapping: The "swap method" involves replacing the faulty component with an identical one (same type, bus mode, and function). This method is particularly useful in environments where easy-to-plug components are involved. For example, if there are memory errors, you can swap out the faulty memory stick with another one of the same type to determine if the issue is with the memory.

Summary of Changes:

  • Grammar and Punctuation: Corrected verb tenses, articles, prepositions, and punctuation for clarity and readability.
  • Clarity of Instructions: Reworded certain sentences to make the instructions clearer and more concise.
  • Technical Terminology: Made sure technical terms (e.g., "flash the BIOS") were used correctly and consistently.

 

(0/10)

clearall