Rework Station With Hot Air nozzles

Rework Station with Hot Air nozzle. Buy automatic rework station from us, then get Hot Air nozzles for free

Description

Automatic Rework Station with Hot Air nozzles

An automatic rework station with hot air nozzles is a piece of electronic equipment used for repairing and reworking

electronic components on printed circuit boards (PCBs). It typically consists of a base unit, hot-air, IR-preheating,a nozzle,

and a control system.

1.Application Of Automatic Rework Station with nozzles.

Solder, reball, desoldering different kind of chips: BGA,PGA,POP,BQFP,QFN,SOT223,PLCC,TQFP,TDFN,TSOP,

PBGA,CPGA,LED chip.

2.Product Features of Automatic Rework Station with nozzles.

3.Specification of laser positioning Rework Station with nozzles.

Ecellent technical details enable advanced functions and stability.

power	5300W
Top heater	Hot air 1200W
Bottom heater	Hot air 1200W.Infrared 2700W
Power supply	AC220V±10% 50/60Hz
Dimension	L530W670H790 mm
Positioning	V-groove PCB support, and with external universal fixture
Temperature control	K type thermocouple, closed loop control, independent heating
Temperature accuracy	±2℃
PCB size	Max 450490 mm,Min 2222 mm
Workbench fine-tuning	±15mm forward/backward,±15mm right/left
BGAchip	8080-11mm
Minimum chip spacing	0.15mm
Temp Sensor	1(optional)
Net weight	70kg

4.Details of Infrared CCD Camera Rework Station with Hot Air Gun Soldering Iron

5.Why Choose Our Automatic Rework Station with Hot Air Gun Soldering Iron?

6.Certificate of Optical Alignment Rework Station with nozzles.

UL, E-MARK, CCC, FCC, CE ROHS certificates. Meanwhile, to improve and perfect the quality system,

Dinghua has passed ISO, GMP, FCCA, C-TPAT on-site audit certification.

pace bga rework station

7.Packing & Shipment of Automatic CCD Camera Rework Station with nozzles.

8.Shipment for Split Vision Rework Station with nozzles.

DHL/TNT/FEDEX. If you want other shipping term, please tell us. We will support you.

Related Knowledge of Automatic Rework Station with Hot Air Gun Soldering Iron

Electrode Determination Method

For testing transistors, use the R100 setting for germanium transistors and the R1k setting for silicon transistors on the multimeter. First, fix the red probe on any one pin, and use the black probe to measure the other two pins. Look for two small resistance values. If no small resistance is found, move the red probe to a different pin and continue testing until you find two small resistances. If no small resistance is detected with the red probe fixed, switch to fixing the black probe and repeat the process.

Once two small resistances are found, the fixed probe indicates the base. If the black probe is fixed, the transistor is NPN. If the red probe is fixed, the transistor is PNP.

A. Resistance Method for Judging Polarity

Use a multimeter to measure the resistance between the two pins, excluding the base. Perform the measurement twice, reversing the probes each time. For germanium transistors, the measured resistance will be smaller. If it's a PNP type, the black probe should be connected to the emitter and the red probe to the collector. For an NPN type, the black probe should connect to the collector, and the red probe to the emitter. For silicon transistors, the measured resistance will be larger.

B. PN Junction Forward Resistance Method

Measure the forward resistance of the two PN junctions individually. The pin with the higher resistance is the emitter, and the pin with the lower resistance is the collector.

C. Amplification Factor Method

Use the two test leads of the multimeter to contact the two pins other than the base. For a PNP transistor, touch the base and the pin connected to the red probe to see the pointer swing. Then, reverse the probes and measure again. The higher reading indicates the correct configuration, with the red probe connected to the collector. For an NPN transistor, the black probe will be connected to the collector.

Note: The difference between an analog meter and a digital meter is that the red probe of an analog meter is connected to the negative side of the power supply, whereas for a digital meter, it is the opposite.

Related Products: