HD Touch Screen Bga Soldering Station
HD touchscreen BGA soldering station Small mobile phone rework machine, automatically moving up/down top head, and can be moved leftward or rightward by hand, except cell phone, also repairing webcamera, Wifi box and some small communicated equipment etc. The product parameter of HD touch screen...
Description
HD touchscreen BGA soldering station
Small mobile phone rework machine, automatically moving up/down top head, and can be moved leftward or rightward by hand,
except cell phone, also repairing webcamera, Wifi box and some small communicated equipment etc.
The product parameter of HD touch screen BGA soldering station
|
Total Power |
2300W |
|
Top hot air heater |
450W |
|
Bottom diode heater |
1800W |
|
Power |
AC110/220V±10%50/60Hz |
|
Lighting |
Taiwan led working light, any angle adjusted. |
|
Operation mode |
High definition touch screen, intelligent conversational interface, digital system setting |
|
Storage |
5000 groups |
|
Top heater movement |
Automatic up / down with button, manual Right/left, |
|
Lower IR preheating area |
Manual rear/ front movement. |
|
Positioning |
Intelligent positioning, PCB can be adjusted in X, Y direction with "5 points support" + V-groov PCB bracket + universal fixtures. |
|
Temperature control |
K sensor, close loop |
|
Temp accuracy |
±2℃ |
|
PCB size |
Max 170×220 mm Min 22×22 mm |
|
BGA chip |
2x2 mm - 80x80 mm |
|
Minimum chip spacing |
0.15mm |
|
External temper sensor |
1pc |
|
Dimensions |
L540*W310*H500mm |
|
Net weight |
16KG |
The product details of HD touch screen BGA soldering station

Automatic top head, moving up or down by pressing buttons for soldering or desoldering mobile phone chip , such as, Iphone,
Samsung and Huawei etc.

Guide rail for top head easy moving to left or right

Guide rail for IR preheating area moved rearward or frontward

Beam put PCB on , can be moved to left or right for PCB fixed

Carbon fiber heating tubes imported from German, for mobile phone and other small PCB preheating, anti high
temperature glass covering , to prevent any small component or dust from dropping inside .

PanelMaster brand computer, all of parameters set , click "start" to start machine, temperature controlling is more
accurate, temperature catching frequency is faster.

BGA Rework Station DH-200 Dimensions:
- LWH (mm): 540 * 310 * 500 mm
- Compact machine, small carton box, and lower shipping cost.
Delivery, Shipping, and Service of the HD Touch Screen BGA Soldering Station
- Vibration testing before delivery.
- The machine is packed in a carton box: 63 * 44 * 58 cm.
- Gross weight: 33 kg.
- Includes: Teaching CD and manual.
- If you encounter any problems that you cannot solve, we offer Skype video calls, WhatsApp video calls, and other support options.
FAQ
Q: Can this rework station repair all mobile phones?
A: Yes, it can repair phones like iPhone, Samsung, Huawei, Vivo, etc.
Q: Does it only do desoldering?
A: No, it can both solder and desolder.
Q: Will it be packed in a plywood box?
A: No, it will be packed in a carton case with foam inside. It's lightweight and helps lower shipping costs.
Q: How do I choose the correct nozzles?
A: It's best to choose a nozzle that is slightly larger than the chip (e.g., IC, BGA).
Know-How About the BGA Soldering Station
The repair requirements for area-array packages are influenced by the current limitations of reflow soldering. Although desoldering can be done with most existing hot air equipment, controlling the desoldering process is one of the most difficult tasks. In rework, as in production, quality is the ultimate goal. High-quality BGA reflow soldering can be achieved in the closed environment of a reflow oven during production.
However, rework cannot be performed in a completely enclosed environment, as achieving the necessary heating conditions for BGA reflow is challenging when hot air is blown through a nozzle. Success in rework depends on achieving uniform heat distribution across the package and the PCB pads without causing components to shift or blow away during reflow.
Convective heat transfer during the repair process involves blowing hot air through a nozzle. The dynamics of airflow, including laminar flow, high and low-pressure zones, and circulation velocity, are complex. When these physical effects are combined with heat absorption and distribution, and the structure of the hot air nozzle for localized heating, proper BGA repair becomes difficult. Any fluctuations in pressure or issues with the compressed air source or pump in the hot air system can significantly reduce the performance of the rework machine.
Some hot air nozzles that make contact with the PCB to provide more uniform air circulation and heat distribution may face challenges if adjacent components are too close. These nozzles may not touch the PCB directly, disrupting the intended air circulation pattern and causing uneven heating of the BGA. Additionally, hot air from the nozzles can sometimes blow nearby components or damage adjacent plastic parts.
Many rework systems store multiple temperature settings, but this may be misleading unless the purpose of the temperature curve is clearly understood. In production equipment, an accurate temperature curve is crucial for process control because it ensures all solder joints are heated evenly and reach the required peak temperature. The starting point for setting production parameters is the actual temperature of the board. By analyzing the material's temperature, process engineers can adjust the heating parameters to achieve the desired temperature profile.
Convection rework equipment that stores various heating elements or air temperature settings can only approximate the temperature conditions on the board. A more precise method is to monitor and record the actual temperature profile of the board or component by attaching a K-type thermocouple to the PCB during reflow. During reflow, the actual inspection of solder joints is the fundamental form of process control.









