SMD rework machine

                                        Keyboard Touch Screen SMD Rework Dtation 

1. Product Features of IRDA keyboard touch screen smd rework station

1.High precision temperature thermocouple can feel the actual temperature precisely.

2. Suction force of the vacuum pump is adjustable, 360 degree rotation in. F. Angle , mounting nozzle is 

micro-adjustable.

3. Over-heating protection for the upper hot air heating head.

4. Large ir preheating from the bottom, made of imported heater, will heat the pcb evenly to avoid defo-

rmation and keep solder effect, heating board is independent controlled.

5. Equipped with different alloy hot air nozzles (customizable), easy to replace.

2.Specification of IRDA keyboard touch screen smd rework station

3.Details of IRDA keyboard touch screen smd rework station

1.HD Touch screen interface; 

2.Three independent heaters ( hot air & infrared );

3. Vacuum pen;

4.Led headlamp.

4.Why Choose Our IRDA keyboard touch screen smd rework station? 

5.Certificate of IRDA keyboard touch screen smd rework station

6.Packing & Shipment of IRDA keyboard touch screen smd rework station

7.Related knowledge

Solder paste usage and related precautions

Solder paste must be stored in the refrigerator. The temperature is set to 0~10°C, and the solder paste 

stock is stored in the refrigerator at 0~10°C). Use according to the principle of FIFO. (According to the 

LOT number or manufacturer of solder paste. Manufacturing date). Guaranteed period of 90 days is used

 up. If not used, it will be scrapped.

The temperature inside the refrigerator needs to be tested four times a day, and the white nights are tested

 twice each (10:00 16:00 22:00 4:00) and the temperature curve needs to be done.

Paste must be taken out of the refrigerator in advance before use, and can be unpacked by leaving it in working

 environment (22~28°C) for 6 hours. Put it in solder paste mixer and stir evenly for 5 minutes, then use it for half

 an hour before use. ( Refer to solder paste mixer operation instruction book)

For the TED customer's request, the KEY IN serial number must first be used in the SFCS every time a new bottle

 of solder paste is used, in order to track the use of the solder paste.

For TED products, printing bit, ICT, PI bit, brush SFCS, you must tick the SUBLINE at the PCB collection station (YES 

CHECK Line, not this line of the board can not brush SFCS in this line)

Unopened solder paste after reheating, can be stored below 28°C for 7 days (Refer to Paste Stirring Specification)

 Abnormal FE Special Handling)

Solder paste PCB should be finished in 100 minutes

Kaifeng's solder paste has not been used for more than 24 hours for end-of-life disposal. When the solder paste 

is abnormal (eg: storage temperature, storage period is abnormal, the engineering unit must be notified of FE, 

viscosity test. The viscosity value is 320 ~ 392PA.S. Available) and fill in <Stencil Abnormal Condition Record> 

Viscosity Test Method Reference Viscometer Tester Instructions.