Best BGA Rework Station

Best Automatic Optical BGA Rework Station

1.Application Of Automatic Best BGA Rework Station

Work with all kinds of motherboards or PCBA.

Solder, reball, desoldering different kind of chips: BGA,PGA,POP,BQFP,QFN,SOT223,PLCC,TQFP,TDFN,TSOP, PBGA,CPGA,LED chip.

2.Product Features of Best Optical BGA Rework Station

3.Specification of Best BGA Rework Station

4.Details of Automatic Laser Positioning BGA Reballing Station

5.Why Choose Our Automatic Laser Positioning BGA Reballing Station? 

6.Certificate of Automatic Optical BGA Soldering Rework Station with CCD Camera

UL, E-MARK, CCC, FCC, CE ROHS certificates. Meanwhile, to improve and perfect the quality system, Dinghua has passed ISO, GMP, FCCA, C-TPAT on-site audit certification.

7.Packing & Shipment of Automatic BGA Soldering Rework Station

8.Shipment for Automatic BGA Soldering Rework Station

DHL/TNT/FEDEX. If you want other shipping term, please tell us. We will support you.

9. Terms of Payment

Bank transfer, Western Union, Credit Card.

Please tell us if you need other support. 

10. How DH-A2 Automatic SMD Repair Station work?

11. Related knowledge

Why is the computer motherboard jumper?  

The jumper is very important. If the motherboard is unstable, the motherboard will not work, and even the other components will be damaged. Therefore, be sure to read the motherboard manual carefully when adjusting the jumper, check the jumper name, jumper number and continuity. Although the jumper settings for different devices are different.  The so-called jumper, that is, the metal pins (jumpers) embedded in the computer motherboard, hard disk, optical drive and other devices, and the jumper caps on these metal posts. Whether it is a motherboard or a hard drive, an optical drive, etc., you can see the jumper. The jumper column is a small metal column. The second jumper cap looks like a plastic cap with two holes from the outside. The outer layer of the jumper cap (plastic layer) is insulated and protected. It has two inside. Block metal shrapnel, so when the jumper cap is inserted on the jumper, a path is formed between the two jumper posts.  The function of the jumper is to adjust the on/off relationship of different electrical signals on the device and adjust the working state of the device. Such as determining the working voltage of the cpu, the FSB, the master-slave relationship of the driver, and so on. It should be noted that one jumper has at least two jumper posts, but there can also be multiple jumper posts. From the perspective of arrangement and combination, jumpers with multiple jumper posts (should be said to be jumper groups) can be adjusted much more than jumpers with only two jumper posts, so this jumper group tends to Used on the computer motherboard to adjust the cpu FSB, multiplier, etc. (for overclocking).  There are many places on the computer motherboard that need to set the "on-off" relationship, so this is also the place with the most jumpers, such as cmos, cpu, bios, sound card, keyboard boot, etc. For beginners who are new to computer motherboard repair, set correctly. Jumpers on the motherboard are skills that must be mastered.  In addition, many motherboards also have a dip switch setting to replace the jumper cap, which is more convenient and simple to use. The upper right corner of the dip switch usually has an "on" sign, indicating that the switch is turned on when it is pulled up, which is equivalent to the jumper cap insertion state, and the downward is off "off" state.